| |
| Product Picture |
Product Name |
Product Explanation |
|
BUG-GY |
The BUG-GY Fillet Welder is a trackless, self-guiding welding carriage designed for making continuous or intermittent welds on fillet, lap, or butt joints. It is a lightweight, portable carriage that uses a powerful electro magnet and guide wheels to clamp and track on the work piece. |
|
|
BUG-GY-VERT |
The BUG-GY-VERT is a portable, battery powered, 4-wheel drive welding carriage with torch oscillation. It is compact, lightweight and easy to position and it will accommodate most handheld welding guns. Strong permanent magnets hold the machine on the workpiece allowing it to travel on vertical or oblique surfaces. Guide wheels on the BUG-GY-VERT automatically track the torch in the fillet joint. By providing constant travel speed the BUG-GY-VERT can increase the productivity and the quality of welding applications in many areas of steel fabrication or shipbuilding. |
|
|
DC IV |
The BUG-O DC IV is a dual speed range, positive rack & pinion drive, ready for mounting welding or cutting attachments and accessories. It consists of a DC IV Drive unit mounted on a 12" (305 mm) Carriage. This unit runs on standard Aluminum Rigid Rail & Aluminum Flex Rail.
|
|
|
Gofer |
GO-FER III Kits are available in specific configurations and are an affordable solution for welding, plasma or oxy-fuel cutting. The kits come complete with a drive, torch holder, 8 foot rail and on/off magnet assemblies. Additional sections of rail, a radius cutting attachment and vacuum cups for non-ferrous applications are also available. |
|
|
Portable Beveling Machine |
|
|
|
MINI-VERT |
The Mini-Vert is a lightweight battery powered welding travel carriage. It is held on the workpiece with strong permanent magnets. It will travel and carry
a welding gun in flat or vertical positions producing continuous uniform fillet welds. The Mini-Vert features a quick torch mount which allows the welding gun to be rapidly moved from one side
of the machine to the other, enabling the operator to weld
the entire work piece from end
to end.
|
|
|
MM1 Programmable Pipe Cutter |
|
|
|
Moduler Drive System |
The MODULAR DRIVE SYSTEM is a powerful machine that allows the operator to custom configure one machine for various applications. The modular design allows the user to quickly reconfigure the unit for cutting or welding, stich welding or weave welding, all with the same machine. |
|
|
Rails and Attachments |
|
|
|
Fixtures and Positioning Equipments |
|
|
|
STIFFENER WELDER(with Lincoln feeders) |
The Stiffener Welder is a self contained, dual head welding travel carriage with integrated wire feeders and spool mounts. It will produce continuous or programmable imtermittent fillet welds on stiffeners with heights of 3" to 16" (75-400mm) and widths up to 12" (0-300mm). The unit is self propelled and runs directly on the stiffener. Spring loaded floating torch holders compensate and maintain torch standoff with variations of work piece fit-up. The machine can be used with solid or cored welding wire. |
|
|
Carriages |
|
|
|
TRAC-BUG |
The Trac-Bug is a compact friction drive cutting machine that will ride on any standard 6\" (152 mm) V-grooved track. A solid-state variable speed control allows the Trac-Bug to travel and carry a torch at precise speeds producing a machined quality cut or bevel. Plate cutting and welding preparation can now be done quickly and with a high degree of precision. Quality bevels produced with the Trac-Bug reduce fit up and grinding time and lay a foundation for a stronger weld.
The Trac-Bug is available in two standard configurations, for Oxy-fuel cutting TRB-1000 and for Plasma cutting TRB-1500. Each version is equipped with a 22-7/8\" (581mm) geared rack for 1-3/\" (47.6 mm) diameter machine torch holder that will accommodate a 32 pitch rack.
|
|
|
UNI-BUG III |
The UNI-BUG III will make continuous or intermittent stitch welds. The machine will mount and run directly on the work piece. Each carriage is designed to fit on a specific steel profile. |
|
|
Universal Bugo Matic |
The UNIVERSAL BUG-O-MATIC is a compact unit which combines a powerful drive and precision oscillator all in one housing. It can be used with 5 different carriages to work on Rigid Rail, Flex Rail, Ring Rails, or Hi-Flex Rails. Ideal for shipbuilding.
|
|
